Aquacraft Mini Rio Instrukcja Użytkownika

www.aquacraftmodels.comWARNING:• Never attempt to swim after a stalled RC boat. • Never operate your RC boat while standing in the water.• Never op

101. It is important to remove and lubricate the drive cable after a day of running. Make sure the power to the boat is turned off and the battery pa

11OTHER BOATS AVAILABLE FROM AQUACRAFTThe AquaCraft Hammer EP requires no assembly or finishing and on-board electronics come installed–from the rudde

COPYRIGHT © 2008COPYRIGHT © 2008AQUB1003 for AQUB15**AQUB1003 for AQUB15**

2ITEMS INCLUDEDWARRANTYAquaCraft will warrant your Mini Rio for 90 days after the purchase from defects in materials or workmanship of original manufa

3INTRODUCTIONThank you for purchasing the AquaCraft™ Mini Rio! We want the time you spend with your new Mini Rio to be fun and successful, so please f

4ORDERING REPLACEMENT PARTSTo order replacement parts for the AquaCraft Mini Rio use the order numbers in the replacement parts list that follows. Rep

5ASSEMBLY1. After removing the transmitter and transmitter antenna from the box, line up the antenna to the hole in the top of the transmitter.2. Sl

64. Turn the transmitter “ON” using the switch on the transmitter’s left side. The battery level indicator light (LED) should glow red. If the light

71. Remove the cowl by rotating the lock near the front of the windshield.2. Remove the cowl.3. After removing the cowl, grab the bar on the top of

87. Reinstall the battery in the boat. You will notice the plug can only be attached one way. Pay particular attention to the polarity of the plug. P

9POWER UP10 . Re-install the covers by aligning the tabs on the bottom of the covers with the tabs in the openings. Rotate the covers 45° to secure th